5
5-21
Setting up IPX (Novell) printing
7.
Type a new line anywhere in the file as follows:
set Bindery Context = O=xx
(
Note that
O
in this line is the letter O, not the digit zero).
N
OTE
:
Instead of
xx
, type the bindery context obtained from the system
administrator. (In this example from a relatively simple directory structure, the
Bindery Context is “TS”.)
8.
Press Esc to close the window, and save changes.
9.
Proceed to the next section.
T
O
ACTIVATE
THE
BINDERY
CONTEXT
:
1.
If you cannot reboot the NetWare server at this point, type the set command
manually at the server’s colon prompt.
Use the same command that you entered in the
autoexec.ncf
file (see Step 7 in the
previous procedure).
2.
If you can reboot the NetWare server, the set command is loaded automatically.
You are ready to set up the Colorwriter print server and print queue. See the next
section for details.
