xiv
Important safety information
Important safety information
This printer is a high-precision electronic device. Therefore be sure to read these
safety instructions carefully before you begin.
Follow all warnings and instructions marked on the printer and consumables,
such as the toner cartridges and silicone oil bottles.
Handling the Colorwriter
•
Do not place this printer on an unstable cart, stand, or table.
•
The printer alone weighs approximately 110 lb (50 kg). Do not attempt to
move it by yourself. It should always be moved by two or more people.
•
When installing the printer, carefully observe the location requirement
described in this manual.
•
When the printer is in use, the fixing assembly and delivery areas become
extremely hot. Be careful not to touch these areas.
•
Before moving the printer, be sure to turn it off and then unplug the power
cable.
Choosing a location for the Colorwriter
•
Do not expose the printer to a wet environment.
•
Make sure the printer is level (at less than a 1% angle); otherwise, a REPLACE
FIXING UNIT PUMP message will be displayed on the control panel.
•
Do not directly expose the printer to a chemical environment, for example, an
experimental laboratory. The exterior of the printer is made of plastic, and the
outside covering may fade, become deformed, or melt.
!
