6
6-18
Installing Windows software
Setting up printing with Windows 95
You can print to the Colorwriter from your Windows 95 workstation over the
parallel port connection, as a client of a NetWare server, or as a client of a
Windows NT workstation or server. In most cases you need to install a PostScript
printer driver and the Colorwriter PPD file on your computer, and set up the
Colorwriter to accept your print jobs. For IPX installation, the NetWare server
must be set up before you set up the Colorwriter and finish setting up the client
workstation.
Windows 95 printing setup is found on the following pages.
Make sure that you have the Windows 95 installation CD or diskettes available
for completing the Colorwriter installation. If you don’t have the installation CD,
ask your administrator to let you access a Windows 95 CD over the network.
T
O
INSTALL
THE
C
OLORWRITER
AS
A
W
INDOWS
95 P
OST
S
CRIPT
PRINTER
:
1.
On your Windows 95 computer, click the Start button, point to Settings, and then
click Printers.
2.
Double-click Add Printer, and then click Next to let the Add Printer Wizard help
install the printer.
3.
When prompted for the type of printer, select Local Printer, and then click Next.
This is a general installation. You can modify the port connection later, according
to your network type.
For this connection to
the Colorwriter:
Use the driver
installation on pages:
Complete the
connection on pages:
Parallel Port
6-18 to 6-21
6-22 to 6-23
IPX (Novell)
6-18 to 6-21
6-25 to 6-25
