6
6-30
Installing Windows software
If you minimize the printer window, the icon view indicates the type of printer.
16.
Connect the printer to a port or a network connection.
•
For a parallel port connection, proceed to the next section.
•
For a TCP/IP connection using lpr, see page 6-31.
•
For an AppleTalk connection, see page 6-34.
•
For an IPX (Novell) connection, see page 6-38.
Completing the Windows NT parallel port connection
In the section “Setting up printing from Windows NT” on page 6-26, you
installed the Windows NT PostScript driver and the Colorwriter PPD. Complete
the setup for parallel port printing as follows:
•
Set up the Colorwriter to accept print jobs over the parallel port.
•
Attach a cable between the workstation and the printer.
•
Configure default settings for the port on the workstation.
T
O
SET
UP
PARALLEL
PRINTING
FOR
W
INDOWS
NT:
1.
In the Program Manager, choose Exit Windows from the File menu.
2.
Turn off the printer.
Printer created on the local
workstation
Printer created on the local workstation
being shared with network clients
Printer being shared by a server on
the network and available to this workstation
