6
6-60
Installing Windows software
Using the Colorwriter LSR Manager
The Colorwriter LSR Manager customizes the
NET_WSCK.INI
configuration file to
enable the Colorwriter utilities to communicate with your printer. You will need
to supply additional network information when you run the Colorwriter LSR
Manager. Configuration is described first for IPX networks, and then for TCP/IP
networks (see page 6-64).
Using the Colorwriter LSR Manager with IPX networks
To use Colorwriter LSR utilities with IPX/SPX networks, make sure that:
•
IPX protocols are loaded and bound to the network driver on your workstation.
•
There is a NetWare server on the network, configured with a print server and a
print queue to handle Colorwriter print jobs (see page 5-17).
•
IPX is enabled in Network Setup on the Colorwriter control panel, and a
NetWare connection is chosen (see page 4-9).
T
O
ENTER
YOUR
IPX
NETWORK
SETTINGS
FOR
USE
WITH
THE
C
OLORWRITER
LSR
UTILITIES
:
1.
If you are working on an IPX network with a Novell NetWare server, print a
Configuration page from the Colorwriter.
For information on printing a Configuration page, see “To print pages from the
printer control panel:” on page 3-13.
