4
4-14
Setting up the printer
GATEWAY ADDRESS
This option appears only if
ENABLE TCP/IP
is set to
YES
. Use this option to specify
the gateway address for printing with TCP/IP. By default, no default gateway
address is set. If your TCP/IP network has a gateway or is segmented into subnets
and you plan to print using TCP/IP, you must enter the gateway address. Note
that you need to enter only one gateway address.
ENABLE PARALLEL
YES/NO [YES]
Select
YES
if you want to print through the Colorwriter’s parallel port. You can
connect a single PC or compatible computer to the Colorwriter’s parallel port and
print directly to the Colorwriter.
TIMEOUT (S)
5-60 [15]
This option appears only if
ENABLE PARALLEL
is set to
YES
. Use this option to
specify how long the Colorwriter waits without receiving data from the parallel
port before deciding that the current job is complete. During the timeout, the
Colorwriter cannot receive new jobs through the parallel port, but it continues to
receive network print jobs. If you are experiencing a lot of job time-outs, try
increasing this value.
IGNORE EOF
YES/NO [YES]
This option appears only if
ENABLE PARALLEL
is set to
YES
. Use this option to
specify whether the Colorwriter should ignore end-of-file (EOF) messages in a
file. To print PostScript files in binary format (not ASCII), this option must be set
to
YES
. When this option is set to
YES
, the Colorwriter uses the value you entered
for the parallel port timeout to determine when it has reached the end of the file.
