5-4
Diagnostics and Tests
Color Print Test
The color print test requires a single sheet of paper and is divided into three
separate subtests, one for each color. With the color print test structured in this
way you can check that each nozzle group works correctly.
Data Scop Printing (Hex Dump)
To make sure that the command codes sent from the system are received
correctly, this feature prints the corresponding ASCII code (hexadecimal) of all
the characters that are input into the printer.
To start printing:
•
Power off the printer, then power it back on again while pressing the
On-
Line
and
Install Cartridge
buttons simultaneously.
To stop printing:
•
Press
On-Line
; press this button again to resume printing from where it had
been stopped.
•
Simply power off the printer to exit this print mode.
S-5.PM5
11/7/94, 17:18
4
Summary of Contents for DECcolorwriter 120ic
Page 58: ...3 21 Installation Fig 3 21 Fonts selector switches settings S 3 PM5 11 7 94 17 16 21 ...
Page 59: ...3 22 Installation Fig 3 22 Character sets selector switches settings S 3 PM5 11 7 94 17 16 22 ...
Page 60: ...3 23 Installation Fig 3 23 Character sets selector switches settings S 3 PM5 11 7 94 17 16 23 ...
Page 78: ...7 3 Electrical Interconnections Fig 7 1 Main board S 7 PM5 3 14 97 3 38 PM 3 ...
