6.2 Status Messages
Table 6–2 (Cont.) DEClaser 1152 Status Messages
Message
Description and Action
PS WAIT FOR IDLE
This message displays when job reset is set to no on the
front panel and the user presses
ONLINE
while a job was
printing.
PS TEST PRINT
This message appears while processing and printing the test
page. The control panel keys are buffered during the test
print. You cannot perform a control panel reset of the test
print.
CLEANING PAPER
This message is displayed while the fixing unit cleaning
paper is printing.
LOAD PAPER
This message means the printer is ready to receive the
cleaning paper or manually fed paper.
PS RESET TO STOP
The message appears when the job reset is set to yes on the
front panel and the user presses
ONLINE
to take the printer
off line. To flush the job, press
RESET
. To continue the job,
press any other key.
PS RESETTING JOB
This message displays while the communications buffer is
being cleared and the job is reset.
6.3 Operator Call FIP
When an operator call condition occurs, the printer goes off line and an
operator call message is displayed. The message clears automatically as soon
as the condition is corrected.
Table 6–3 lists all operator call messages, explains the message, and provides
troubleshooting information if the message cannot be cleared or is displayed
for no apparent reason.
Control Panel Messages FIPs 6–3
