6.3 Operator Call FIP
Table 6–3 (Cont.) Operator Call Messages
Number
Message
Description and Action
12 PRINTER OPEN
2
Any one of the following causes this message to appear:
•
The front door of the printer is open.
•
The fixing door is open.
•
No EP-L cartridge is installed.
•
The cooling fan is not turning.
The door sensor is actuated by the tang on the shutter of
the EP-L cartridge. When the front door is closed, a gear
rack on the end of the door rod flips up the shutter lever.
The shutter lever lifts the EP-L shutter and interrupts the
sensor.
The fixing door sensor is actuated by a tang on the left side
of the fixing door. The fixing door must be fully closed to
actuate the sensor.
A sensor in the fan is actuated by the rotation of the
armature.
2
If the two errors occur simultaneously, the 13 PAPER JAM message takes priority over the 12
DOOR OPEN message.
(continued on next page)
Control Panel Messages FIPs 6–7
