6.4 DEClaser 1100 Printer Functional FIP
Table 6–4 (Cont.) DEClaser 1100 Printer Functional Messages
Number
Message
Description and Action
22 LINE ERROR
The host is sending data when the printer is in the busy
state. This causes an overflow of the receive buffer memory.
Press
Error Skip
, then
On Line
to continue. The overflow
data does not print.
This error can occur for the following reasons:
•
If the customer powers up the printer before powering
up the attached host system
•
If the baud rate, flow control, or other interface
parameters are set incorrectly
If this error occurs frequently, check the data cable between
the host and printer and make sure the printer interface
settings match the settings of the host.
If you cannot clear this error, swap the Interface board and
then the Video control board.
23 MEMORY FULL
An overflow occurred while the host was downline loading
user defined character patterns to the printer.
Press
Error Skip
, then
On Line
to continue receiving data
and ignore the data that caused the error.
If this error occurs too frequently, the customer can increase
memory by installing an optional RAM expansion.
24 FULL PAINT REJ
Insufficient memory space to use full paint mode. The
customer can increase memory space by installing an
optional RAM expansion.
Press
Error Skip
, then
On Line
to continue printing in
partial paint mode.
(continued on next page)
6–14 Control Panel Messages FIPs
