10.5 Front (Multipurpose) Tray
10.5.1 Front Cover (Door) Unit
Use the following procedure to remove and replace the front cover (door).
Caution:
Use the standard antistatic equipment and procedures when you
handle this sensitive electronic component.
1. Remove the following components:
a. Front (multipurpose) tray, as shown in Section 10.5
b. EP-L cartridge, as shown in Section 10.13
c. Fixing unit, as shown in Section 10.15
d. Upper cover, as shown in Section 10.2
e. Right and left side covers, as shown in Section 10.3
f. VCU, as shown in Section 10.20
2. Pinch the locking tab and unplug the 2-pin connector J101 from the
LVPSA.
3. Pull the cable free of the molded restraints.
006048s
10–8 Removal and Replacement Procedures and RSL
