10.14 Transfer Charging Roller
10.14 Transfer Charging Roller
Use the following procedure to remove and replace the transfer charging roller
from the front cover:
Caution:
Do not touch the surface of the transfer roller with your fingers.
Finger oil can contaminate the surface causing image defects and a decrease of
the service life.
1. Open the front cover of the printer.
2. Unhook each end
of the transfer roller shaft.
3. Disengage the ground saddle
from the shaft of the pickup roller and
remove the transfer roller and guide assembly.
006074s.
10–38 Removal and Replacement Procedures and RSL
