10.23 Door Rod Assembly
10.23 Door Rod Assembly
Use the following procedure to remove and replace the door rod assembly:
1. Remove the following components:
a. EP-L cartridge, as shown in Section 10.13
b. Fixing unit, as shown in Section 10.15
c. Upper cover, as shown in Section 10.2
d. Right and left side covers, as shown in Section 10.3
Caution:
This note affects replacement of the rod assembly only. Before
you replace the components, close the front door to align the hook
with
the rack
. Damage to the EP-L shutter hinge can result if the alignment is
not as shown.
006105s
10–70 Removal and Replacement Procedures and RSL
