1.4 Switches, Sensors, and Solenoids
1.4 Switches, Sensors, and Solenoids
Figure 1–7 shows the location of each switch, sensor, and solenoid in the
DEClaser 1100 series printer. See Section 9.2, Parts Locator, to find the
locations of FRUs.
Figure 1–7 Switches, Sensors, and Solenoids
Switches:
The HV door switch is a safety feature. See Section 1.11.
The following switches and designations are referred to in Figure 1–7 and on
the wiring diagrams in Section 1.8.
• SW901, SW902, and SW903, the cassette size-sensing switches, are
mounted on the cassette feeder board. (See Table 1–5.)
Physical and Functional Description 1–13
