3.3 Menu Descriptions
Table 3–4 (Cont.) I/F: SERIAL (I/F: SERIALB) Menu
Feature
Values
Description
SER: BAUD RATE
RATE: 300 baud
RATE: 600 baud
RATE: 1200 baud
RATE: 2400 baud
RATE: 4800 baud
RATE: 9600 BAUD
RATE: 19.2K baud
RATE: 38.4K baud
Sets the transmit and receive speed the
printer uses to communicate with the host
computer.
SER: PARITY
A part of the data format the printer uses to
communicate with the host computer. The
printer looks for the type of parity checking
bit in each character. A system can use
an odd, even, space, mark, or no parity
checking, or may elect to use no checking.
The selected settings will only be enforced if
CHECKPARITY is set to YES.
PARITY: NO
No parity bit is sent. This setting is valid
only with 8 data bits.
PARITY: odd
Each character received is checked for odd
parity; each character transmitted will have
an odd number of bits (odd parity). This
setting is valid only with the following
combinations: 7 data bits, 1 or 2 stop bits
and 8 data bits, 1 stop bit.
PARITY: even
Each character received is checked for even
parity; each character transmitted will have
an even number of bits (even parity). This
setting is valid only with the following
combinations: 7 data bits, 1 or 2 stop bits
and 8 data bits, 1 stop bit.
PARITY: space
Always sends a 0 in the parity bit.
PARITY: mark
Always sends a 1 in the parity bit.
(continued on next page)
DEClaser 1152 Printer Control Panel
3–9
