4.3 DEClaser 1100 Printer Font List A
4.3 DEClaser 1100 Printer Font List A
Font List A is a list of internal, cartridge, and downline loaded fonts.
Press
Test/Font
twice to print font list A. The text 06 FONT LIST A is displayed
while the font list is printing.
Fonts are selected by escape sequences sent from the host computer. You
cannot select a font from the control panel. For information about selecting
fonts, refer to the following documents:
•
Digital ANSI-Compliant Printing Protocol Level 3 Programming Reference
Manual
•
Digital ANSI-Compliant Printing Protocol Level 3 Programming
Supplement
4.4 DEClaser 1100 Printer Cleaning Test
The cleaning test print is shown in Figure 4–3.
The two-pass cleaning test cleans the fixing unit rollers. Perform the cleaning
test when:
• Installing a new EP-L cartridge
• Staining occurs at the top or bottom of transparencies
• Paper frequently jams in the fixing unit
The following procedure describes the cleaning test:
1. Press and hold
Test/Font
until the message 08 CLEANING PAP. is
displayed.
If an A4 or letter size cassette is installed, cassette feeding is automatically
selected. If any other size cassette is installed or if no feeder is installed,
tray feeding is selected and one of the following messages is displayed:
PT LOAD LETTER
PT LOAD A4
2. After loading the requested size sheet, press
On Line
to print the cleaning
test print. The message 08 CLEANING PAP. is displayed during the
printing process.
3. After the sheet is ejected, the 08 SET THE PAPER message is displayed.
Place the sheet printed side up in the tray.
4. Press
Test/Font
to start the second pass of the cleaning test.
4–6 DEClaser 1100 Printer Test Prints
