5.4 DEClaser 1152 Printer Engine Test Print
5.4 DEClaser 1152 Printer Engine Test Print
Figure 5–4 is an example of the Engine Test print.
Figure 1–3 shows the location of the TEST PRINT button. Press the TEST
PRINT button with a pencil or other suitable tool to print an engine test print.
The Engine Test print is used for the following purposes:
• To check toner dispersion and line weight
• To verify the condition of the print engine if the video control board, control
panel, or interface board are not installed
The white area of the Engine Test print should be free of toner or smudges,
and the lines must print cleanly across the entire page with no faded areas. If
the print quality is poor, refer to Section 8.1.
5–8 DEClaser 1152 Printer Test Prints
