6.1 Error Skip Procedure
The DEClaser 1100 printer alerts you to error conditions by stopping
the printer, placing it off line, and displaying the type of error on the
control panel. Some error conditions cannot be cleared using the error
skip procedure. For example, 12 PRINTER OPEN needs to be corrected
immediately before printing can continue. You can acknowledge other types
of errors and still continue printing by pressing
Error Skip
. When these types
of errors occur, you may elect to take the long-term corrective action (for
example, adding RAM or reassigning memory) at another time. Use the
procedure in Table 6–1 to acknowledge the error condition and continue
printing.
Table 6–1: Error Skip Procedure
Operation
Display Reads
1. Press
Error Skip
.
— The Alarm indicator
shuts off.
— The error condition
clears.
00 READY
2. Press
On Line
to place the
printer back on line.
— The On Line indicator
lights.
— Printing continues.
00 READY
Some communication or formatting errors may repeat when the printer is
receiving additional communications data. When this happens you may
need to repeat the error skip procedure several times.
6–2
Operator’s Guide
Summary of Contents for DEClaser 1100 Series
