SVS—Set Vertical Spacing
CSI Ps SP L
Where:
Ps = 0
is 1200 centipoints (6 lines/inch, 1/6 inch).
Ps = 1
is 1800 centipoints (4 lines/inch, 1/4 inch).
Ps = 2
is 2400 centipoints (3 lines/inch, 1/3 inch).
Ps = 3
is 600 centipoints (12 lines/inch, 1/12 inch).
Ps = 4
is 900 centipoints (8 lines/inch, 1/8 inch).
Ps = 5
is 1416 centipoints (6 lines/30 mm, 5 mm).
Ps = 6
is 2136 centipoints (4 lines/30 mm, 7.5 mm).
Ps = 7
is 2856 centipoints (3 lines/30 mm, 10 mm).
Ps = 8
is 720 centipoints (12 lines/30 mm, 2.5 mm).
Ps = 9
is 3600 centipoints (2 lines/inch, 1/2 inch).
A.3 Set/Reset Modes
CSI Ps h
Set Mode
CSI Ps l
Reset Mode
Where:
Ps = 3
is CRM–Control Representation Mode
Ps = 11
is PUM–Positioning Unit Mode
Ps = 20
is LNM–Line Feed/New Line Mode
Ps = ?7
is DECAWM–Autowrap Mode
Ps = ?27
is DECPSP–Proportional Spacing Mode
Ps = ?29
is DECPSM–Horizontal Pitch Select Mode
Ps = ?40
is DECCRNLM–Carriage Return/New Line Mode
Ps = ?52
is DECOPM–Origin Placement Mode
A–10
Operator’s Guide
Summary of Contents for DEClaser 1100 Series
