3.1 Using the Keypad in Keypad Mode
Some keys on the keypad perform a dual function, depending on whether
the printer is in Keypad Mode or Menu Mode. In Keypad Mode, the keys
perform the primary function labeled on the key, such as Test/Font or Reset.
NOTE:
With the exception of
On Line
, all keys operate only when the printer
is off line. A ‘‘beep’’ sounds if any of these keys are pressed when the printer
is on line.
3.1.1 Entering Keypad Mode
Use the procedure in Table 3–2 to enter Keypad Mode.
Table 3–2: Entering Keypad Mode
Operation
Display Reads
1. Press
On Line
to place the
printer off line.
— The On Line indicator
goes off.
— The keypad is now in
Keypad Mode.
00 READY
Table 3–3 describes the keypad funtions in Keypad Mode.
Table 3–3: Keypad Functions: Keypad Mode
Key
Function
On Line
Pressing
On Line
alternates the printer between the online
mode and offline mode. The mode is indicated by the green
light on the key.
On: The printer is on line and controlled by the host
computer. The host computer can send data to print, as
well as commands to control the printer.
Off: The printer is off line and cannot receive any data
or commands from the host computer.
It can only be
controlled using the keys on the control panel.
The Control Panel
3–5
Summary of Contents for DEClaser 1100 Series
