4.5.1 FEEDER Menu
The FEEDER menu determines whether paper is fed from the paper tray
or from an optional paper cassette. You can also choose the paper feed
selection using the
Feeder Select
key on the control panel.
See Table 3–3
for more information about using the
Feeder Select
key. Table 4–8 shows the
features and values of the FEEDER menu. Settings from this menu are
automatically saved in RAM. Menu settings can also be saved in NVRAM.
Table 4–8: FEEDER Menu Features and Values
Feature
Values
Description
feeder
Tray
1
Selects the paper tray to feed paper into the
printer.
Cass.
2
Selects the paper cassette to automatically feed
paper into the printer.
1
Factory default setting.
2
Available only when an optional cassette is installed.
4.5.2 LAYOUT Menu
The features of the LAYOUT Menu shown in Table 4–9 allow you to set the
new line so that print wraps when it reaches the right margin. Settings
from this menu can be saved in RAM or NVRAM.
Table 4–9: LAYOUT Menu Features and Values
Feature
Values
Description
autoNL
ON
1
When the print position reaches the right
margin, it wraps to the left margin of the next
line.
OFF
When the print position reaches the right
margin, it does not move to the next line until
the printer receives a carriage return (CR) or
line feed (LF) command from the host computer.
Data beyond the right margin is lost until the
CR or LF command is received.
1
Factory default setting.
4–16
Operator’s Guide
Summary of Contents for DEClaser 1100 Series
