Table 4–17: INTERFACE Menu Features and Values
Feature
Values
Description
i/f
RS232C
1
Selects the RS232C serial interface to communi-
cate with the host computer. Select this value if
your computer uses a serial interface.
When you select the serial interface, you must
select values for all the other features in this
menu (baud rate, rsmode, and so on).
CENTRO
Selects the Centronics parallel interface to
communicate with the host computer. Select this
value if your printer uses a parallel interface.
When you select the parallel interface, all other
features in the interface menu are disabled.
Optional I/O
When an option is plugged into the I/O port, the
I/O option will appear in the i/f menu.
baud
2
300
600
1200
2400
4800
1
9600
19200
Sets the transmit and receive speed the printer
uses to communicate with the host computer.
The printer speed must match the speed used
by the host computer.
rsmode
2
8S
1
8 data bits
No parity check
1 stop bit
8ES
8 data bits
Even parity check
1 stop bit
8OS
8 data bits
Odd parity check
1 stop bit
7ESS
7 data bits
Even parity check
2 stop bits
7OSS
7 data bits
Odd parity check
2 stop bits
7ES
7 data bits
Even parity check
1 stop bit
1
Factory default setting.
2
Available only when RS232C is selected.
Printer Configuration
4–27
Summary of Contents for DEClaser 2100 plus
