Table 5–2: Paper Specifications
Category
Specification
Paper weight: cassette feed
60 g/m
2
to 80 g/m
2
basis weight
(16 lb. to 21 lb.)
Paper weight: manual feed
60 g/m
2
to 135 g/m
2
basis weight
(16 lb. to 35 lb.)
Thickness
0.075 mm to 0.115 mm
Moisture content
5% to 8%
Smoothness
100–300 Sheffield
Brightness
84% minimum recommended
Heat tolerance
200°C (392°F) for 0.1 second
Electrical resistance
1.0 x
10
11
ohm-cm–2.0 x
10
12
ohm-cm
(cubic content)
2.0 x
10
10
ohm-cm–2.0 x
10
11
ohm-cm
(surface)
Cotton (rag) content
25% maximum
5.1.1 Special Considerations When Printing on Paper
Because of the way laser printers print and bond toner to the paper, you
must observe some special requirements with certain types of papers.
•
Do not use preprinted papers that do not meet the specifications for
heat tolerance. The ink from some preprinted papers, such as those
with a company letterhead, can cause smearing and in some extreme
cases could damage the printer.
•
Do not use colored papers in which the color is applied as a coating to
the surface.
•
Do not use thermal papers.
•
Prepunched paper is not recommended.
•
Do not use carbon papers.
Print Media
5–3
Summary of Contents for DEClaser 2100 plus
