. . . . . . . . . . . . . . . . . . . . . . .
TROUBLESHOOTING
If the option you just installed is not listed on the Hardware Report,
you should:
1. Make sure that the Fax Modem is properly attached and
firmly secured to the J7 or J9 connector.
2. Rerun the Hardware Report.
3. If the option is still not listed, move the Fax Modem board
to the other connector (J7 or J9).
4. Rerun the Hardware Report.
5. If the Fax Modem is still not listed, contact your Authorized
Service Provider.
WHERE TO GO FROM HERE
Your Fax Modem option kit contains software to use with the Fax
Modem. Refer to the software package that contains your
operating system for fax utility installation instructions. If no
Operation Guide is supplied for your system, online documentation
is available in the software utility.
SETTING THE FAX CLOCK
After installing the Fax board, you should set the clock. This can
be done through the Fax menu on the printer control panel or by
using the Administrator Utility that ships with the option. Refer to
the printer User's Guide for instructions on using the control panel.
16
Part Number 194683-001 - 08/12/94 - - Saved by digital - -
Rev # - File Name FAXMODM2.DOC
