Module Status
When you select the Module Status menu option, a listing of all the
parameters for the selected module is provided.
To view the status of a module:
1. Select the
Module Status
option from the Main menu.
The NICSETUP utility highlights the settings for the first board.
2. To change boards, select the board and press
Enter
.
Exiting NICSETUP
To exit NICSETUP, select the
Exit
option from the Main menu.
The following warning message appears:
Do you really want to quit? (Y/N)
Press Y to exit NICSETUP, or press any other key to return to the
Main window.
Note
If you do not Write Configuration Data or Write Default Data,
no information is updated to the
Turbo
board when you exit
NICSETUP.
Once you have completed the NICSETUP utility procedure
and modified, if necessary, a configuration file (see Chapter 4),
you must reboot the system for any changes that were made
to take effect.
3–10
Summary of Contents for Digital EtherWORKS 3 Turbo
