J
Epson FX-1050 Quick Reference
dir
This appendix contains basic information on the Epson FX-1050 Emulation
commands supported in the LA310 MultiPrinter. In addition, Table J–11
provides a list of differences between the LA310 MultiPrinter in Epson
FX-1050 emulation mode, and the Epson FX-1050 machine.
The Epson FX-1050 emulation commands are fully detailed in the Epson
ESC/P™ Reference Manual. Refer to this manual when more instructions are
needed.
Characters used in control functions appear in monospaced type. Table J–1
explains some of the conventions used.
A pair of numbers separated by a slash (/) character indicates Column/Row
notation. This notation refers to the location of a character in a standard code
table, such as ASCII.
Spaces appear between characters in sequences for clarity; they are not part of
the format.
The following conventions are used in the command listings:
Table J–1 Conventions
ESC
Escape (1/11), introduces an escape sequence
n1 n2
A 2 byte number of data beginning with the next byte, low byte followed
by high byte. This number indicates the number of parameters in the
escape sequence.
n
Numeric parameter, or number of units that specify a distance or
quantity pertaining to the escape sequence, control function or control
string. Unless specified, maximum value is 255.
d1 ... dn
A series of parameters pertaining to the escape sequence, control function
or control string. The number of parameters is determined by
n1 n2
.
When
d1 d2
make a 16-bit word,
d2
is the most significant byte, and it
gives a signed 16-bit value.
Epson FX-1050 Quick Reference
J–1