18
1st Edition, April 1993
Selecting a Font
7. Press DOWN. “Style/[font]” displays. Press NEXT or PREV to cycle through the font options. (DP
10 6 is default. The first number is characters per inch; the second number is lines per inch. The font
options are abbreviated on the display: DP = Data Processing; CORESPON = Correspondence;
COMPRESS = Compressed; HS = High Speed; OCR A = Optical Character Recognition, Set A;
OCR B = Optical Character Recognition, Set B.)
8. When the desired font shows on the display, press ENTER. An asterisk (*) appears on the display,
indicating that this font will print.
9. Press CLEAR to return the printer to off–line status. The display reads “Off–Line/Emulation.”
10. Press UP and DOWN simultaneously to lock the ENTER switch. “Locked” displays momentarily.
11. Close the printer cover.
12. Press the ON LINE switch to place the printer on–line.
13. To make the font selection occur automatically when the printer is turned on, save the printer
configuration. (See page 19.)
