Chapter 2: Installing the Adaptec Host Adapter
EK
−
SMRAA
−
IG. A01
2
−
5
Figure 2
–2 Subsystem SCSI Bus Connector
2.3
Running Configuration Utilities
Some PCI- or EISA-system environments may require that you run configuration utilities
after installing the adapter. Consult your system documentation to verify if your EISA- or
PCI-based system requires you to run such configuration utilities (e.g., EISA configuration
utility).
Follow the instructions described in your system documentation to run these utilities.
Your adapter package includes the adapter-specific software required during this process.
2.4
Verifying Adapter Settings
After installing the host adapter, verify that it is configured to the default settings. See Sec-
tion 3, Default Settings in the Adaptec Installation Guide (fold out), Adaptec Stock Number
510497
−
00 for a list of the default settings. If you need to change the settings back to the de-
faults, see Section 8, Configuring the Host Adapter in the Adaptec Installation Guide.