Operating the UltraSCSI Enclosure
UltraSCSI RAID Enclosure 2–13
Turning On the Subsystem Power
After completing subsystem expansion or moving the subsystem, complete
the procedure in Table 2–5:
Table 2–5 Turning On the Subsystem Power
1. When there are no expansion enclosures, go to Step 4.
2. Starting with an expansion enclosure, turn O
N
all the power
controllers by pressing
1
on each power switch.
1
0
CXO5488A
AC power
switch
AC receptacle
3. Repeat Step 1 for the other expansion enclosure.
4. Turn on all the ac power controllers in the master enclosure.
5. The array controller restores the subsystem to an operational state.
Summary of Contents for StorageWorks UltraSCSI DS-BA370 Series
