Contents
Preface
vii
Chapter 1
Specifications and Preparation
1.1
Upgrade Kit Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1–2
1.2
Battery Backup Kit Specifications . . . . . . . . . . . . . . . . . . . . .
1–4
1.3
Save EEPROM Contents to TK Tape . . . . . . . . . . . . . . . . . . .
1–6
1.4
Record System Parameters . . . . . . . . . . . . . . . . . . . . . . . . . .
1–8
1.5
Prepare Area, Kits, and Tools . . . . . . . . . . . . . . . . . . . . . . . . 1–10
1.6
Unpacking Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–12
Chapter 2
XMI-1 to XMI-2 Conversion
2.1
Full Upgrade Procedure Overview . . . . . . . . . . . . . . . . . . . . .
2–2
2.2
Step 1, Remove the XMI-1 Card Cage . . . . . . . . . . . . . . . . . .
2–4
2.2.1
Prepare for Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2–4
2.2.2
Remove the XMI-1 Card Cage from the Cabinet . . . . . . . .
2–8
2.3
Step 2, Remove the H7214 Power Regulator(s) . . . . . . . . . . . 2–10
2.3.1
Replace the H7214 in Position 2, if Necessary . . . . . . . . . . 2–12
2.3.2
Remove the H7214 in Position 3 . . . . . . . . . . . . . . . . . . . . 2–14
2.4
Step 3, Install the H7242 Power Regulator . . . . . . . . . . . . . . 2–16
2.5
Step 4, Install the XMI-2 Card Cage . . . . . . . . . . . . . . . . . . . 2–18
2.5.1
Attach the Daughter Card and Install the Card Cage . . . . 2–19
2.5.2
Attach XMI-2 Card Cage Cables . . . . . . . . . . . . . . . . . . . . 2–20
2.5.3
Complete XMI-2 Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . 2–24
2.6
Step 5, Replace the XTC Power Sequencer . . . . . . . . . . . . . . 2–26
2.7
Step 6, Remove the H7231-N Battery Backup Unit . . . . . . . . 2–28
2.8
Step 7, Replace the Power and Logic Unit . . . . . . . . . . . . . . . 2–30
2.8.1
Remove the H7206-A Power and Logic Unit . . . . . . . . . . . 2–31
2.8.2
Replace the Power and Logic Unit Mounting Plate . . . . . . 2–32
iii
