TitanWire Machine Operation Manual
Dear Customer,
Thank you for purchasing our TitanWire machine. The following are basic installation
and operation instructions. For advanced binding instructions, please contact DFG.
Determine metal wire binding element size
There are two methods you can use: (ETitanCoil machine shown)
1.
Use coil that is 2-3 mm (1/8” ) larger than book thickness
2.
Use our coil size selector. Refer to picture (ETitanCoil machine shown)
Installation
1.
Install punching handle and binding handle
2.
Install the screws to lock the handles
Put book on machine base, under the
“Size Selector”. Move the “Size
Selector” down until its bottom
touches the top sheets of the book.
The top of the “Size Selector” will
point to a wire size on the scale you
can use
1260
Kempar
,
Madison Heights
, MI 480
71
, U.S.A. Phone: 248-733-0400, Fax: 775-587-5352
Email: info@dfgus.com Website: www.dfgus.com
