4
3. Connecting card tray
Upon issuing the card using paper feeding feature on the right, as the NG cards transported to the printer will be ejected,
replace the standard hopper unit with an optional card tray.
Mount the card tray according to the following procedures:
1.
Pull out the standard hopper unit diagonally upwards.
2.
Insert the optional card tray diagonally downwards.
(
Note:
The cleaning roller should be left as it is.)
3.
Enter the service mode of the printer main unit, select “Card Loading” under the maintenance items and switch from
“standard” to “Right Side”.
4.
Settings other than this and operating procedures are dependent to the user system.
Note:
If there are 10 cards accumulated continuously in the card tray, the printer will display “Card Tray Full”. Remove
the cards immediately.
5. Keep the removed hopper unit safely.
