Page 26
Troubleshooting
What is the problem?
Try this:
1
A message appears on the PC.
•
Click the Help button on the message box to see possible causes
and the solution for each cause. See the “Related Topics” to fix
the problem.
2
The printed cards do not look the
way that was intended.
•
If you moved the ribbon while the printer was powered off, print
another card. If the problem persists, see
Info Central
for detailed
information about solving card appearance problems.
3
Cards jam often.
•
The brand of cards might be heavily powdered, dirty, or bowed
(curved). Consider buying a different brand of cards or clean the
printer more often to use the cards.
•
The printer rollers might be dirty. See
Info Central
for steps to
clean the printer rollers.
4
The ribbon has broken.
•
Trim the end of the broken ribbon evenly. If ribbon on the take-up
spool is not wound firmly or is uneven, remove it. Tape the end of
the ribbon onto the
same
take-up spool, making the edges of the
ribbon and spool even.
•
If the ribbon breaks repeatedly, settings might not be correct for
the card design and ribbon. See Setup in
Info Central
.
