background image

6

Press 

K

N

B

 to reset the printer

.

Memo:

v

To avoid printing errors, it is recommended that you forward by one
or two images after installing the ink ribbon cassette or retransfer film
cassette.

"Initializing printer when installing the cassette" (

A

 page 21)

Setting Cards

v

The card hopper is able to store up to about 200 cards with a thickness
of 0.76 mm.

Cautions:

v

Get ready cards that are designated by the authorized dealer.

v

If the security lock function is turned on, the card hopper will be
locked. Turn off the function from the computer. After loading the
card, turn on the function again from the computer.

v

Do not touch the printing surface of the card. Touching it may cause
printing errors. Put on the supplied gloves when handling the cards.

v

To prevent card jams from occurring, limit the number of cards
stored in the card hopper at any time to about 100 pieces regardless
of the card thickness.

v

When using new cards, set them after making sure that they are not
adhered to each other due to static.

v

Align the cards before setting them in the printer. Otherwise, the card
hopper cover may not close properly, and this may damage the
printer.

v

Printing the card on the side with the magnetic stripe may cause
printing errors or damage to the card’s functions. If you want to do
so, please consult our authorized dealers in advance.

v

To set cards with both functions (magnetic stripe and contact IC),
follow the procedure for setting the contact IC card.

1

Set the card hopper knob to [OPEN]

.

2

Lift to remove the card hopper cover

.

Setup

60

Summary of Contents for XID 8300

































































Reviews: