4
Assemble the System
Installation Steps
4-4 Preproofer
–
HW Installation manual
Preproofer IM749
8-12 EN
3.)
Glue the lower cable channel underneath the shelf
as shown:
(1)
Cable Channel
(2)
Hole for Power Supply Shuffle Box, Serial cable
(3)
Hole for USB Cable
(4)
Open end for mains cable
4.)
Insert the bottom shelf and secure it with
4 bolts/washers/nuts (2 on each side).
5.)
Insert the upper cross beam and screw it with
2 bolts/washers/nuts on the left and with
2 bolts/washers/nuts the right leg.
1
1
1
1