DIGITAL LAB DLP234-04, Instruction Manual

4

USING THE RADIO 

TUNING IN RADIO STATIONS 

1.

Move the FUNCTION switch to RADIO position, the POWER indicator will illuminate.   

2.

Slide the BAND switch to select the desired wave band: AM, FM ST. 

3.

Tune to required station by rotating the TUNING KNOB. 

4.

Rotate the VOLUME CONTROL to comfortable volume level. 

5.

Extend the TELESCOPIC ANTENNA to its full length if you are listening to FM broadcasting. 
Gently rock the unit back and forth to get the best reception when you are listening to AM 
program, or place the unit in an open place. 
Note: The FM STEREO indicator will be on if you are receiving FM stereo program. 

6.

Turn off the radio by switching the FUNCTION switch to "OFF" position. 

USING THE CD 

Set the FUNCTION SWITCH to “CD/AUX” position. Lift to open the CD door to put in a compact 

disc, close the door and the player will start reading. The LED display always shows the tracks 

of a disc which are still to be played. 

Playing The Entire Disc 

1.

Playback will start by pressing CD PLAY/PAUSE button, playback starts with the first track. 

The display will show the current track number. 

2.

To interrupt playback, press CD PLAY/PAUSE button.   

3.

To resume playback, press CD PLAY/PAUSE button once again. 

4.

To stop playback, press CD STOP button. 

Note: 

1.  To ensure good system performance: wait until the player completely reads the disc    

before proceeding. 

2.    If no disc is loaded into the compartment, or the disc is placed upside down, the display will 

show “

N0 

”.

SELECTING A DESIRED TRACK/PASSAGE 

To select a desired track   

1.

Press SKIP/SEARCH FORWARD/BACKWARD button repeatedly in stop mode or during 

play until the desired track appears on the display. 

2.

Press PLAY/PAUSE button to start play. 

To search for a particular passage during playback (track scanning at high speed) 

1.    Press and hold SKIP/SEARCH BACKWARD/FORWARD button to scan the current playing 

track at high speed until desired point(passage), then release the button. 

2.    Playback will start again from this point. 

REPEAT PLAY 

When playing, press REPEAT button once. REPEAT INDICATOR will light up and flash for 

playing the same track only. If repeat all tracks, press the REPEAT button again, REPEAT 

INDICATOR will light up. To cancel repeat play, press the REPEAT button until the repeat 

indicator disappears.