DIGITAL LAB DLP234-04, Instruction Manual

5

PROGRAM PLAY 

1.

Press “PROG” button to make program memory in stop mode. 

2.

“ 

01

 ” will be shown flashing on the display, Program indicator will light up and flash. 

3.

Press CD SKIP/SEARCH FORWARD/BACKWARD button to select a track number. The 

track number will show on display. 

4.

Press the “PROG” button to store the track number. 

5.

“ 

02

 ” flashes again. Repeat step (3) to (4) to program other desired tracks. 

6.

Press “PROG” button once more after 20 track in programmed and all the programmed track 

numbers will be shown one by one 

7.

Press CD PLAY/PAUSE button, playback will start from the first programmed track. 

8.

You can press CD SKIP SEARCH FORWARD/BACKWARD button to select the track 

number in memory. 

9.

In stop mode, press STOP button to cancel the program play and the program indicator will 

disappear. 

RANDOM PLAY 

Press the CD RANDOM button in Play/Stop mode, 

the current track number and 

“

- - ” will 

flash again and again

. And then press the CD PLAY/PAUSE button. Playback will start from 

any one track (not in the order of the disc).

HEADPHONES 

For private listening, plug the headphones/earphones (not included) into PHONES jack(3.5 mm 

diameter). 

CAUTION

: Long time listening with headphones/earphones at high volumes may cause harmful 

damage to users’ ears. 

 
AUX-IN OPERATION 

This unit has provided special AUX-IN jack (AUX-IN cable not Included), through this jack other 

audio sources can be connected to this unit and be amplified. 

1.

Set the FUNCTION switch to CD/AUX position.   

2.

Connect the audio cable into the AUX-IN jack and the other connect the other end to the 

AUDIO OUT jack of the external audio source. The unit will change to AUX mode 

automatically. 

3.

Adjust the volume of the main unit to your desired level. 

4.

Press PLAY of the external audio source (eg. MP3 player) to start playback.