Graphic Touchscreen Keypad User’s Guide
9
If an alarm occurs on a non-fire, 24-hour zone or a system monitor,
it remains in the Sta tus List until it re stores. If one or more armed
burglary zones trips, the last one to trip remains in the Status List.
The burglary zone alarm remains in the Status List until it is cleared
by disarming the system. Pressing
CMD
allows the next status list
item to be displayed
Zone Status
To display the status of a particular zone, Press
Keypad
on the
Carousel Menu to display the Keypad screen. Enter the zone number
followed by
CMD
when the screen displays the
Status
List.
Armed Status
With
Armed
status, the screen displays the current armed condition
of areas within your security system.
The screen displays
When
HOME SYSTEM ON
The perimeter areas is armed in a
Home/Away
system.
PERIMETER ON
The perimeter is armed in an
All/Perimeter
system.
ALL SYSTEM ON
All areas are on.
SLEEP SYSTEM ON
The perimeter and interior areas are on
but the bedroom area is off.
Exit Error
This is an automatic panel function that occurs if an exit door does
not close completely after the system is armed.
For example, if the front door is left ajar upon exit and the exit delay
time expires, the system attempts to arm the front door zone but
recognizes the open condition. The system sounds the alarm sirens
and starts the entry delay. If the open condition is not corrected, an
alarm and exit error is reported to the Central Station.
Exit Error
allows the Central Station to acknowledge the arming
error without dispatching the police on a false alarm.
