background image

Graphic Touchscreen Keypad User’s Guide

Carousel Menu

zones in an Area system or all zones assigned to the perimeter in 

a Home/Sleep/Away or All/Perimeter system. To deactivate, press 

CHIME again until it glows.
4. 

PANIC

: Your keypad may be programmed at installation to send 

POLICE

EMERGENCY

, or 

FIRE

 report to the Central Station. If 

this option is programmed for your keypad, pressing Panic on the 

Carousel Menu displays the Panic Options screen. Press the desired 

icon until it glows.

The Main Screen Carousel Menu provides scrollable options. (The 

Panic, Chime, Check-in and Keypad icons are default options on 

the Carousel). Scroll through the available options by pressing 

within the 

Carousel Menu area and moving your finger up or down.

You may select any options within the Carousel Menu by pressing  

the desired icon.

Note:  

Pressing the blue mini shield that displays in the upper left 

corner of any of the Carousel Menu screens will return you 

to the Main Screen.

1. 

RESET

: When your system had a 

previous fire alarm, this option is 

used to reset the smoke detector 

sensors. Pressing 

RESET

 until it 

glows resets the sensors. SENSORS 

OFF displays in the upper right 

corner followed by SENSORS ON 

when RESET is successful.
2. 

CHECK-IN

: Pressing 

CHECK-IN

 

until it glows displays the Keypad 

screen prompting entry of a 

USER 

CODE

. Enter your user code to 

send a Check-in Report.
3. 

CHIME

: Press CHIME until it 

glows. This activates MONITOR. 

The System Status displays 

MONITOR ON in the upper right 

corner and a blue door icon 

displays in the System Status 

display. This initiates the Zone 

Monitor operation for all Exit 

Panic

Chime

Check-in

Reset

MONITOR ON

Main Screen 

Carousel Menu

BRIGHTNESS

TONE

VOLUME

MODEL NUMBER 7800 V100 111912

INSTALLER

OPTIONS

7. Keypad User Options

PANIC OPTIONS

PRESS  AND HOLD BUTTON TO SEND

FIRE

POLICE

EMERGENCY

4. Panic

DISARMED

NOW

TUE

Panic

Chime

Check-in

Fire Reset

MONITOR ON

3. Chime

ENTER CODE:           

RESET

1

ABC 

5

MNO

9

YZ

 

2

DEF

 

6

PQR

0

 

3

GHI

 

7

STU

 

4

JKL 

8

VWX

CMD

ALL

CHIME

PERIM

HOME

SLEEP

USER MENU

USER CHECKIN?           

2. Check-in

ALARM

Panic

Chime

Check-in

Fire Reset

1. Reset

EXIT TIMER

EXIT TIMER

MON 5:35 PM

3 5

ARM

INSTANT

5. Easy Exit

SYSTEM READY

RESET

1

ABC 

5

MNO

9

YZ

 

2

DEF

 

6

PQR

0

 

3

GHI

 

7

STU

 

4

JKL 

8

VWX

CMD

ALL

CHIME

PERIM

HOME

SLEEP

6. Keypad Screen

Reset

Easy Exit

Keypad

Options

MONITOR ON

Lights

Locks

Thermostats

Favorites

MONITOR ON

LIGHTS

MON 5:35 PM

OFF            ON

OFF            ON

OFF            ON

Living Room

Kitchen

-

+

-

+

-

+

Front Porch

Bedroom

- - -

 - 

- - -

OFF            ON

8. Z-Wave Lights

LOCKS

MON 5:35 PM

UNLOCK           LOCK

Front Door

Back Door

- - -

 - 

- - -

UNLOCK           LOCK

Locked

Unlocked

UNLOCK           LOCK

Warehouse Door

Upstairs Door

UNLOCK           LOCK

Unlocked

Locked

9. Z-Wave Locks

THERMOSTAT

MON 5:35 PM

SETPOINT

- - -

 - 

- - -

ON

AUTO

70

72

HEAT

OFF

COOL

10. Z-Wave Thermostat

FAVORITES

MON 5:35 PM

Lock All

Bedroom

- - -

 - 

- - -

Morning

Movie

11. Z-Wave Favorites

Summary of Contents for GRAPHIC TOUCHSCREEN KEYPAD


























Reviews: