HDuDTA Manual
7
3. Installing
1) Peripheral device setting
A
. Connect the wall cable source to CABLE IN on the All Digital Device.
B
. Connect the All Digital Device to the TV. Use a coaxial cable to connect TV OUT on the
All Digital Device to the ANT jack on the TV
C
. Connect the All Digital Device to the TV. Use an HDMI cable (not included) to connect
HDMI OUT on the All Digital Device to the HDMI input on the TV
D
. Connect the AC Adaptor to the POWER input on the All Digital Device. Connect the AC
Adaptor to a power outlet on the wall.
(A surge protected power outlet is recommended.)