Digital Projection
E-Vision 8000 series
A TOUR OF THE MENUS
Operating Guide
Page Op_10
Rev A April 2012
Color sub menu
•
Press
ENTER
to open the Color sub menu.
Colour Temperature
•
Set this to suit the specification of the input source, or to improve the appearance of the
projected image.
Trim
•
Set the
Red
,
Green
and
Blue
Lift
and
Gain
settings, to improve the appearance of the
projected image.
Sharpness, Noise Reduction
•
Adjust the sliders for these settings, as required.
Aspect Ratio
•
Set
Aspect Ratio
to suit the incoming video signal.
The
5:4
,
4:3
,
16:10
,
16:9
,
1.88:1
and
2.35:1
settings will stretch the image to the
selected aspect ratio, leaving black bars at the top and bottom or sides of the screen,
depending on the aspect ratio of the projector.
The
Letterbox
setting can be used where a wide screen image has been supplied in a
narrower format with black bars at the top and bottom. The top and bottom of the image
will be cropped,and the image stretched to fill the screen.
The
Native
setting will scale the image to fit either the full height or width of the screen,
whilst retaining the aspect ratio of the image.
The
Unscaled
setting will display the image pixel for pixel at its supplied resolution, in
the centre of the screen. There may be black bars at the top and bottom or sides of the
screen, or the image may be cropped, depending on the video signal and the aspect
ratio of the projector.
Notes
See also
Using the Menus
, earlier
in this guide and
Menu Map
, later in
this guide.
The full height and width of the
screen will depend on the projector
model. For more information, see
the
Specification leaflet
, or the
Important Information
.
16:10 image
displayed at 5:4
displayed at 2.35:1
letterbox image
stretched and cropped
5:4 image
displayed at native
displayed unscaled
PICTURE Menu
continued
