Digital Projection
E-Vision 8000 series
A TOUR OF THE MENUS
Operating Guide
Page Op_12
Rev A April 2012
LAMPS Menu
Mode
•
Set this to
Single
or
Dual
as required.
When the mode is changed, it will not be possible to change it again within five minutes.
Power
•
Set this to
Normal
for 100% power,
Eco
for 80% power or
Custom
to enable the
Custom Power slider.
High Altitude Mode
•
Set this to
On
if it is necessary to have the cooling fans running at high speed.
Custom Power
•
Set the slider as required.
Lamp Status and Time
•
For information only.
Notes
See also
Using the Menus
, earlier
in this guide and
Menu Map
, later in
this guide.
When
Lamp Mode
is set to
Single
,
the projector will turn on using the
lamp with the least hours of use.
To protect the lamps from thermal
shock, it will not be possible to
change the
Lamp Mode
more than
once within five minutes.
The
Power
setting should be set
to
Custom
, if you want to use the
Custom Power
slider.
