page 2.15 105-681B January 2007
Digital Projection
LIGHTNING 30sx+m, 40sx+m
User Manual
2. Installation
Notes
EDID handshaking
If you are using a computer DVI card or other DVI source that obeys the EDID
handshaking protocol, then the card or source will automatically configure itself to
suit the projector.
If not, then you should refer to the documentation supplied with the DVI source to
manually set the resolution to 1400 x 1050 or the nearest suitable setting.
Example: setting up the MMS 1000 multimedia switcher
The MMS multimedia switcher does not use EDID protocols, therefore you should
use the MMS menus to manually set the output resolution as follows:
•
Switcher Options
→
Page 5
→
Output Resolution
→
SxGA (1400 x 1050)
Projector Output
The projector has loop-through output. This enables signals to be passed through
to a second projector in a stacking situation.
Ensure that DVI Repeater is ON - see
Source menu
, in
section 4. Using the
menus
.
Example
DVI video source
LIGHTNING
In
Out
In
LIGHTNING
