page 5.2 105-681B January 2007
5. Maintenance
Digital Projection
LIGHTNING 30sx+m, 40sx+m
User Manual
Changing the lamp
The lamp should be changed after 750 hours of use, as indicated on the lamp-hours
meter. The meter is located on the front of the lamp module, and is accesible inside
the lamp compartment door.
To open the lamp compartment door:
•
Give the catch half a turn anti-clockwise, to release the catch.
Notes
Always allow the lamp to cool
for 5 minutes before
removing the lamp module.
There are no user-serviceable
parts inside the lamp module.
The whole module should be
replaced and returned to
Digital Projection for re-
furbishment.
Do not use the lamp for more
than 750 hours, as this may
cause serious lamp failure,
damage the lamp module and
cause extra cost on
replacement.
Xenon lamps produce high
intensity light. Do not look
directly at the light coming
from the lamp housing or the
lens.
Door
catch
Lamp module
