page 6.8 105-681B January 2007
6. Appendix
Digital Projection
LIGHTNING 30sx+m, 40sx+m
User Manual
Notes
Cable complexity and
interference can be reduced by
using the Digilink high
bandwidth optical connection
system. Contact your dealer for
more information.
The analog pins to the right of
the connector may be fitted on
some models, but are unused.
Connections
DVI-D connection
1
TMDS Data 2-
2
TMDS Data 2+
3
TMDS Data 2/4 Shield
4
TMDS Data 4-
5
TMDS Data 4+
6
DDC Clock
7
DDC Data
8
unused
9
TMDS Data 1-
10
TMDS Data 1+
11
TMDS Data 1/3 Shield
12
TMDS Data 3-
13
TMDS Data 3+
14
+5 V Power
15
Ground
16
Hot Plug Detect*
17
TMDS Data 0-
18
TMDS Data 0+
19
TMDS Data 0+
20
TMDS Data 0/5 Shield
21
TMDS Data 5 -
22
TMDS Data 5+
23
TMDS Clock Shield
24
TMDS Clock+
*
Hot plug detect (HPD) is fully DVI compliant. DVI sources detect the presence of
a display device by pro5V on pin 14 and looking for +5V on pin 16.
Whenever the projector is operational, and 5V is present on pin 14, pin 16 will be
held at +5V.
EDID is available even when the projector is switched off.
Operational means that the projector is powered up. Non operational states are
powered down and some self test and reprogramming modes.
pin view of female connector
