28
EPP mode. Read your computer’s manual for instructions
on how to enter SETUP/BIOS (Usually done by pressing
“delete” key during power up.)
c) Enter the TWAIN screen and access the scanner. Do a
test scan to ensure no error messages are received.
d) If error messages are received, or scanner still doesn’t
work. Change BIOS parallel mode setting on your
computer to ECP mode and repeat step c.
e) If you receive an error message or the scanner still
doesn’t work, call tech support for assistance.
Q:
How do I change BIOS parallel mode setting to EPP or
ECP mode?
A:
Since there are different BIOS models, the setting
method is different for different BIOS. We take the
AWARD BIOS as the example, if the BIOS of your
computer is not AWARD BIOS, please read the manual
of your computer or contact with the BIOS
manufacturer for instructions.
Please take the following steps to set the parallel mode
to EPP or ECP mode (the steps is for AWARD BIOS):
a) To start Setup, press the <Del> key during boot-up before
or while a message similar to this “Press DEL if you want
to enter SETUP” appears briefly at the bottom of the
screen.
b) When you invoke Setup, the CMOS SETUP UTILITY main
program screen will appear with several options. Please
select “CHIPSET FEATURES SETUP” option and press
