Event Out
▽
SMTP(E-Mail)
The camera can be configured to send event and error email messages via SMTP (Simple Mail
Transfer Protocol).
• SMTP (E-Mail) Setting: Select “Enable” to activate the SMTP operation.
o
Sender: Enter an email address to be used as the sender for all messages sent
by the camera.
o
Interval: Represents the time interval of the email notification when events
occur several times.
o
Aggregate events: Shows the maximum number of emails sent within each
interval.
o
Use Mail Server: Check the box if you are using a mail server to receive event
notification and image email.
•
Mail Server: Enter the hostnames (or IP addresses) for your mail server.
•
Port: Enter the port number for your mail server. Enable the sending of notifications
and image email messages from the camera to predefined addresses via SMTP.
•
Connection security: Select a connection security type in the drop-down list:
o
None / StartTLS / SSL
•
User name/Password: Enter the User name and Password as provided by your
network administrator or ISP (Internet Service Provider).
•
Login method: Choose a log-in method in the drop-down list:
o
AUTH LOGIN / AUTH PLAIN
• SMTP (E-Mail) Receiver: User can assign up to 8 receivers.
o
Receiver #: Enter an email address.
40
