▽
Record
When the camera detects an event, it can record the video stream onto the SD memory (not
supplied) or NAS (Network Attached Device) as a storage device. Check the “Enable Record”
box to enable the service.
• Record-Setting:
o
Overwrite: Click the checkbox to overwrite the storage device; Continuous
Record is available when not using an SD card.
o
Stream Type: You can select Stream 1, Stream 2, Stream 3, or Stream 4.
•
Stream 1, 3, 4: H.264 data
NOTE: Stream 2: MJPEG data cannot be recorded.
o
Pre-event: Enter pre-event time value for the storage device pre-recording.
o
Post-event: Enter post-event time value for the storage device pre-recording.
o
Audio Record: Check the box if you want to record audio with video.
• Record Schedule: You can set the weekly recording schedule for each day. Drag or click
area by a box unit at first. Clicking the block toggles the recording between on and off.
Click the All Select button to set a schedule for the entire week or a whole day,
respectively.
• Device Setting: Select the device type to be recorded in the drop-down list. The screen
changes according to selection.
o
SD: Mounted SD card.
44
