▽
Boost
The Boost feature is used in conjunction with event detection. When this feature is turned ON,
the Frame rate and Bit rate in the boost condition can be set to a different value than the ones
in the normal condition field. When an event is detected, the camera will boost the Frame rate
and Bit rate from the normal condition to this boosted level for the duration of the event.
Check the box to enable the service.
• Boost Setting: You can set the condition in Normal and Boost mode.
o
Boot Stream: Select a video stream for each condition in the drop-down list.
o
Frame rate: Select a frame refresh rate per second for each condition in the
drop-down list.
• Bit rate control: Select CBR or CVBR in the drop-down list in Normal Condition. You
cannot change it in Boost Condition.
• Bit rate: Select a value for each condition in the drop-down list.
Click ‘Save’ to save the settings, or click ‘Reset’ to clear all the changes.
47