• OpenVPN Client Mode
1. Checking the “Enable OpenVPN” box activates mode selection buttons. Choose
Client mode, then Client Mode Configuration appears where you can configure Client
Mode Settings.
2. In Client Mode Configuration, you can setup Server URL, Protocol type, Port number,
LZO usage, and Renegotiation time.
o
Server URL sets OpenVPN IP address.
o
Protocol type, Port number, and LZO setting must match the Server setting.
o
Default Renegotiation time is 3600 seconds, and 0 means no verification.
o
Upload CA certificate issued by Server.
3. Select the authentication method between User authentication and Machine
authentication.
o
For Machine authentication, upload client certificate and client key provided by
Server.
o
For User authentication, type in registered ID and Password.
4. After finishing setup, click the Save button and then the camera operates as an
OpenVPN Client.
Click ‘Save’ to save the settings, or click ‘Reset’ to clear all the changes.
63
